Layout guidelines with each package purchase
We make it easy to build a great Infrared Sauna
Questions? email with confidence (we do NOT share info or sell email addresses)saunadesign@mac.com or call toll free 877-624-1249
Michigan: 517-552-1249
Pay by PayPal account, contact us to send you a PayPal invoice
or use most any credit card (phone us), or mail us check or money order.
We listen to your comments and requests.
In response, we are excited to inform you of some new products
now available for commercial and residential applications.
Heat Therapy Products, Inc. now offers custom complete sauna kits in any size or shape you desire.
Kits contain all interior wood pre cut to fit your interior studded walls dimensions.
We also offer a selection of standard sized kits.
Both custom and standard sizes:
• 1x4, V-joint, Tongue & Groove, kiln-dried, knot free Western Red Cedar
• Foil vapor barrier
• Base and Ceiling Trim
• Bench/s pre-assembled
• Sauna Door, pre-hung with window, handles and hinges
• Duckboard, Western Red Cedar Flooring
• Accessory Package includes thermometer, and wall light fixture
• Installation instructions
• Delivered to your home or business
We specialize in three different types of saunas:
• Far Infrared Only Saunas, usually smaller saunas for one or two people,
custom and standard sized kits includes wood
• Hot Rock Only Saunas can be any size or shape,
custom and standard kits includes wood
• Combo Sauna: Hot Rock with an Infrared section for detox and therapy capability
- all in one unit - custom, includes wood
• Or: Component parts only: you supply the wood, etc.
or for refitting an existing hot rock or inferior infrared unit.
Our expertise is also in creating Custom Layouts, designed to fit your specific space.
We assure you the best plan for full body coverage in the infrared sections.
Only at Heat Therapy Products, Inc.:
Three specifically designed emitter housing sizes
Let me explain how effective Heat Therapy Products' three different emitter housing sizes are. As an example: when used as part of our 12 emitter sauna package for two users. (We provide component packages for all size sauna structures)
1) Two emitters in one housing: Installed above the bench in the back wall. These cover the entire lumbar to neck area for each sitting person. The two in one set up is also very effective when mounted on the side walls above bench for excellent infrared coverage on the sides of the body. (In a two person sauna switch sides with your partner every 10 minutes or so.)
2) One single emitter housing: Installed under the bench, lining up perfectly, one for each person sitting at the bench. These are to be angled so that their focus is to the calf-buttocks.
3) Three emitters in one housing: designed for the front and sides of the body, lower emitter covers the feet to the knees, middle emitter covers the mid-body area and the top emitter gives coverage to the upper body. We recommend 2 three emitter housings, one on the left front angled facing the bench and the other on the right side also angled to the sitting positions.
By the way, our two and three emitter housings are easier and faster to install than ever before, come to you with pre-wired housings, with high temp wire, and easy incoming wire connectors: at no additional cost.
By building your sauna using our recommended number of emitters & layout guide you will create the best possible infrared sauna. Yours will be more effective, have greater benefits, and make better use of the precious infrared than any Sauna you can purchase prebuilt. (we are constantly working with folks updating their portable saunas by adding our components.)
Just recently Heat Therapy Products, Inc. was the only company that could create an infrared sauna environment that met the demanding requirements for a detoxing clinic.
The flexibility of our exclusive optional features
delivered the most exacting control for their specific desired results.
layout design, specific to your space:
free with purchase of any infrared sauna component package
-sauna layouts for the handicapped and special needs folks too-
Please email us for current pricing
DIY Far Infrared Sauna Component Packages
Individual Sauna Component Items also available: see below
One Person Infrared Sauna Component Packages
Standard Infrared Sauna
Approximate interior sauna size 40" X 40" X 68"
7 emitters, housings, stainless steel reflectors and cover screens
Main sauna controls: dual heat sensors, one digital touch pad
"Optional" whole sauna micron controller
"Optional" second digital touch pad (control from interior of sauna & exterior)
Sauna construction guidelines and full body coverage layout suggestions, and
free design service, (with residential orders)
Commercial designs subject to modest fee based on complextiy of layout.
Ultimate infrared one extra emitter on each side of door to give best front body coverage
Approximate interior sauna size 40" X 40" X 68"
9 emitters, housings, stainless steel reflectors and cover screens
Main sauna controls: dual heat sensors, one digital touch pad
"Optional"whole sauna micron controller
"Optional" second digital touch pad (control from interior of sauna & exterior)
Sauna construction guidelines and full body coverage layout suggestions, and
free design service, (with residential orders).
Commercial designs subject to modest fee based on complexity of layout.
Two Person Infrared Sauna Component Packages
Standard Infrared Sauna
Approximate interior sauna size 48" X 40" X 68"
10 emitters, housings, stainless steel reflectors and cover screens
Main sauna controls: dual heat sensors, one digital touch pad
"Optional" whole sauna micron controller
"Optional" second digital touch pad (control from interior of sauna & exterior)
Sauna construction guidelines and full body coverage layout suggestions, and
free design service, (with residential orders).
Commercial designs subject to modest fee based on complexity of layout.Ultimate infrared one extra emitter on each side of door to give best front body coverage
Approximate interior sauna size 48" X 40" X 68"
12 emitters, housings, stainless steel reflectors and cover screens
Main sauna controls: dual heat sensors, one digital touch pad
"Optional"whole sauna micron controller
"Optional" second digital touch pad (control from interior of sauna & exterior)
Sauna construction guidelines and full body coverage layout suggestions, and
free design service, (with residential orders).
Commercial designs subject to modest fee based on complexity of layout.
ComboSauna & Custom Component Packages
DIY Combo FIR-Infrared Sauna & Hot Rock all in one unit component packages for just about any size
• Electronic sauna controls
• Two heat Sensors
• Two digital touch pads -for interior and exterior of sauna
• Concave solid ceramic emitters
• Emitter housings, stainless steel reflectors, stainless steel cover screens
• Special Hot Rock heater to work with the Infrared
Free with order: sauna layoutHow to order a ComboSauna or Custom Infrared Sauna Package:
1) Email us your space dimensions.
2) We figure the appropriate number of infrared emitters, their placement for best infrared coverage, and design the unit layout.
3) We quote pricing based on the components needed.email your dimensions for pricing, custom package deals, any questions or for further information. saunadesign@mac.com
*******************************************
Hot Summer Special on a Combo Sauna
Order a combo sauna within the next 4 weeks
at our every day great price.
We will include our exclusive infrared "micron controller"
completely wired together with the master control
in one metal electrical box FREE
A $425.00 value!
*******************************************
Please Note: Heat Therapy Products, Inc. Infrared sauna component packages do not include pre cut wood for the sauna construction nor the electrical wiring.
Infrared Sauna Individual Component Parts
and Accessories
Prices lower when ordering a complete package.
Let us put together a complete package for you which will include
all the necessary components for your custom sauna.
Call us or email with your space dimensions,
we'll work out the most effective emitter layout for you
-layout design included with package purchase
Emitter with Housing
for use in portable units w/ exterior connect/disconnect connectors
• One concave solid ceramic far infrared emitter 163 or 200 watt
-please specify wattage
• Housing
• Polished reflector
• Protective cover screen
• Completely wired with ground, high temperature wire
• With 8 inch leads.
Emitter with Extended Housing
for use in portable or built in units w/ extended housing with covered section for regular wire connections
• One concave solid ceramic far infrared emitter 163 or 200 watt
-please specify wattage
• Housing
• Polished reflector
• Protective cover screen
• Completely wired with ground, high temperature wire
• With 8 inch leads.
One concave solid ceramic far infrared sauna emitter
• 163 or 200 watt
-please specify wattage
UL recognized
One Touch Control Pad
• Y adapter
• Female connector
• Extra cat 5 line.
• Use quanity of two for dual-interior and exterior-sauna control set up.
This unit sets the time and temperature and turns the light on and off.
(needs the electronic control box -below- to function) UL recognized
Digital far infrared sauna Electronic Control Unit
One of the best in the world
• Dual thermostat sensors
• One touch pad which sets the temperature
• Auto shut off
• Displays time left in session
• Controls on and off light
• 120 and 240 volt systems -please specify- UL recognized
Unlike the industry standard units where the electronics and the control pad are combined in one unit exposing the electronics to heat, our electronics are separate from the control pad. This means the electronics can be installed away from the heat on the outside of the sauna unit extending dramatically the life of the electronics.
Sauna Door Handles
• One Pair solid poplar or fir wood
please specify wood typeVapor Sealed Sauna Light
• 4” ceiling mount
par20 halogen bulb not included
Sauna Ceiling Vent
• 6” adjustable exit air vent
mounted on ceiling or wall, close to the ceiling, over the bench
important component for every sauna15 Minute Sand Timer
5" Chrome Thermometer
"SAUNA" sign, cedar, laser etched
Heat Therapy Products, Inc. has taken great care in developing guidelines and layouts for all of our sauna packages. Even so, it is important to go over the sauna's complete guidelines with a licensed electrician before starting your project. The electronic controls, and emitters we supply are UL, however your sauna will still need to be inspected by a licensed electrician before use. Heat Therapy Products, Inc. is supplying parts and instructions and is not responsible or liable for the construction of your sauna, including wiring.
How to order? its easy:
1) Call us so we can discuss your order with all the options
2) We will send you detailed invoice by mail or email for your approval
3) You can call in your credit card information
or
4) We can send you a paypal invoice by email that you can easily process using paypal
or
5) You can also send a check, money order or we can arrange a money transfer
• Heat Therapy Products Inc. has a flawless reputation;
if there is a problem it will be our #1 priority to solve.
• We have never had a claim filed against us, ever.
• All our products are constucted/manufactured here in the USA
Milo: Pres. Research, Design & Manufacturing
Heat Therapy Products, Inc.
Howell, Michigan 48843
to get pricing, to purchase, or with any questions:
email us: saunadesign@mac.com
or call toll free: 1-877-624-1249
Michigan local: 1-517-552-1249
Door Handles 
kVapor Sealed Light V
Sauna Ceiling Vent